Shop

Key features: Universal (for monitors up to 7") 1/4" mounting points Adjustable foam handles Rubber padass Battery plate with M3 mounting points

1 x 8Sinn VCT Universal Shoulder Base Plate2 x 8Sinn Side Arm for Shoulder Rigs2 x 8Sinn Dual Side Grip+ free set of 15MM Carbon Fiber Rods (choose the length in the drop-down menu)

Key features: Arri locating points Threaded openings - 1/4" 2 poinst of cage-to-camera attachment (2x bottom 1/4") Full access to camera features Clean-cut ergonomic design Aluminum made and Lightweight

Key features: 1/4" mounting points (on top & both sides) Arri locating point (3/8" mounting point on top) Anti-twist M2.5 screw fixed to the Eyelet attachment Strap holder M4 threads (top front, bottom front) Easy access Lightweight build

Key features: Available lengths: 20cm, 30cm Material: carbon fiber Lightweight

Key features: M12 Female threads on both ends Available lenghts: 10, 15, 20, 25, 30cm Aluminum made

Essential accessory for everyday use. Lens' are just as, or if not more, important than the camera itself. So when setting up your rig, don't forget to support the lens.

Key features:- 1/4” mounting points- 3/8” mounting points with Arri locating pins- M4 mounting points- Cold shoe mount- Strap holder- Aluminum made- Lightweight construction

Essential accessory for everyday use.

Key features: Ergonomic Walnut wood Attachment: 32mm Arri Rosette Toolless monting (thumbscrew) Left side compatible

Essential accessory for everyday use.

Key features: Pre-assembled three-piece half cage Solid cage-to-camera attachment (1x top & 2 x bottom 1/4 “ mounting screws) 3/8” Arri locating points 1/4" threaded openings Strap holder Cold shoe

Key features: Solid cage-to-camera attachment Arri locating points (+ 3/8" mounting point) 1/4" mounting points 3-piece cage Aluminum made

Key features: Arri locating points (+ 3/8" mounting point) 8 x 1/4" mounting threads 4 x M4 mounting threads 2 points of plate-to-camera attachment Aluminum made

Key features: 2 points of support-to-cage attachment 2 points of support-to-adapter attachment Aluminum made Lightweight

Set includes: 8Sinn Cage for Red Komodo + Top Plate 8Sinn Black Raven Top Handle 8Sinn 15mm Baseplate 8Sinn Riser Plate I 8Sinn 10" Arri Dovetail Plate (rods not included)

Key features: 0,005mm accuracy Infinity focusing Aluminum alloy Black anodized Made in UE Weight (without PL cap) - only 160g / 5.6 oz

Key features: 1/4" threaded openings Built-in NATO rails HDMI protective clamp 4 points of monitor-to-cage attachment 3/8" to 1/4" reduction screw Easy access to all sockets One piece of aluminum Strap holder

Key features: Stainless steel PL mount flange 0,005mm accuracy Infinity focusing Aluminum alloy and stainless steel Black/silver anodized Weight ( without PL cap) - 376 g / 13.3 oz

Key features: 1/4" threaded openings Built-in NATO rails HDMI protective clamp 2 points of monitor-to-cage attachment 3/8" to 1/4" reduction screw Easy access to all sockets One piece of aluminum Strap holder

- Compatibility with Sony FX3 and FX30- Aluminum made- 2 points of support-to-cage attachment- 1 point of support-to-adapter attachment

Key features:- Compatibility with Sony FX3 and FX30- 15mm rod standard- Integrated Cold Shoe- Secure mount prevents deviation (2x1/4")- Aluminum made- Lightweight

Key features: 1/4" mounting screw 180° tilt adjustment Tool-free Rubber pads Aluminum made

Key features: Fabric + plastic insert Detachable Foldable Attachment: velcro straps

Key features: Sensor & bayonet mount protection CNC machined One piece of aluminium Lightweight Anodized Wooden detail Lens mount index Easy grip

Key features: Reversible extension arm Arri Rosette attachments 2 x 1/4" mounting points No tools Aluminum made Lightweight

Following kit includes: 1 set - 8Sinn 15mm Baseplate + Riser Plate I 2 sets - 8Sinn Side Arm for Shoulder Rigs + Dual Side Grip 1 pc - 8Sinn Shoulder Support Rods not included !

Key features: 15mm rod compatible 6 x 1/4" threaded mounting points Aluminum made 60mm center-tocenter distance Thumb screw on each side

Baseplate features 2 x 32mm Arri Rosettes 15mm rod compatible 3 x thumbscrews 4 x 1/4" threaded oppenings Dovetail guide rails (bottom) Riser Plate features: 1/4" and 3/8" mounting screw Rubber pads Dovetail features: Length: 5" (127mm) Release pin Stopper screw Helicoil 1/4" and 3/8" threads

Baseplate features 2 x 32mm Arri Rosettes 15mm rod compatible 3 x thumbscrews 4 x 1/4" threaded oppenings Dovetail guide rails (bottom) Riser Plate features: 1/4" and 3/8" mounting screw Rubber pads Dovetail features: Length: 10" (254mm) Release pin Stopper screw Helicoil 1/4" and 3/8" threads

Baseplate features 2 x 32mm Arri Rosettes 15mm rod compatible 3 x thumbscrews 4 x 1/4" threaded oppenings Dovetail guide rails (bottom) Riser Plate features: 1/4" and 3/8" mounting screw Rubber pads Dovetail features: Length: 5" (127mm) Release pin Stopper screw Helicoil 1/4" and 3/8" threads

Baseplate features 2 x 32mm Arri Rosettes 15mm rod compatible 3 x thumbscrews 4 x 1/4" threaded oppenings Dovetail guide rails (bottom) Riser Plate features: 1/4" and 3/8" mounting screw Rubber pads Dovetail features: Length: 10" (254mm) Release pin Stopper screw Helicoil 1/4" and 3/8" threads

Key features: Stainless steel Size&thread pitch: 1/4"x20 Slotted socket

Key features: Stainless steel Size&thread pitch: 3/8"x16 Slotted socket

Holder features: 1/4" mounting screw 180-degree regulation Quick-release system NATO standard Rubber pads Aluminum made Rail features NATO standard 60mm lenght Safety pin Aluminum made

Holder features: 1/4" mounting screw 180-degree regulation Quick-release system NATO standard Rubber pads Aluminum made Rail features NATO standard 95mm long Safety pin 3/8" thread + Arri locating points Aluminum made

Key features: 360-degree rotation M6 mounting screw 4 cold shoes 1/4" and 3/8" mounting points 15mm rod mount Solid structure Aluminum made

- 1/4" mounting points- Arri locating point (3/8" mounting point on top)- M4 threads (top front, bottom front)- Cold shoe mount- Strap holder- Aluminum made

- Mounting bracket + HDMI clamp- Three-piece clamp- Adjustable span- Aluminum made

Key features: Ergonomic design Four-piece cage joined with screws Easy access to plugs, slots, and buttons 1/4" mounting points 2 poinst of cage-to-camera attachment (side and bottom) Arri locating points (+ 3/8" mounting point) top and bottom Strap holder Compatible with Sigma LVF-11 LCD...

- 1/4" mounting points- One mounting screw (bottom)- Cold shoe mount- Strap holder- 3/8" Arri locating points- Standardized spread of the mounting points- Better access to on/off switch

Key features: 1/4" mounting points Arri locating points (+ 3/8" mounting points) M4 mountin points (top-front) 4-piece cage Built-in safety NATO rails (sides) Aluminum made

1/4" mounting points 3/8" Arri locating point M4 threads (upper-front) Anti-twist M2.5 screw (eyelet attachment) Cold shoe Strap holder

- 4 points of plate-to-camera attachment- 1/4" mounting points- 3/8" mounting points + Arri locating points- Mounting forwards or backwards- Aluminum made

- 2 points of plate-to-camera attachment- 1/4" mounting points- 3/8" mounting points + Arri locating points- Aluminum made

- Left and right side suitability- 2 points of plate-to-camera attachment- 1/4" mounting points- 3/8" mounting points + Arri locating points- Aluminum made